- e-mail: sales@trunm.com
- address: YONGKANG TRUNM IMP&EXP CO. ,LTD 8F,NO.51WUZHOU ROAD.HEADQUARTER CENTER,YONGKANG CITY,ZHEJIANG PROVINCE
- Ask a question
ASPRO - CONSTRUCTION EQUIPMENTAND TOOLS
ASPRO-500® PUMP FOR INJECTING RESINS (CEMENT)
- Home / Catalog / Equipment for injection of concrete, foundations / Injection pumps / ASPRO-500® PUMP FOR INJECTING RESINS (CEMENT)
ASPRO-500® PUMP FOR INJECTING RESINS (CEMENT)
| ENGINE POWER, W: | 690 |
| MAX PRESSURE, BAR: | 400 |
| PRODUCTION L/MIN: | 1 |
| VOLTAGE, V / FREQUENCY, HZ: | 220/50 |
Buy
- Description
- Tech. char-cs
- Equipment
- Video
The universal electric one-component injection pump is designed to supply polyurethane, epoxy resins and microemulsions under pressure.
With the help of an injection pump, it is easy and quick to perform waterproofing and repair work in concrete structures:
stopping active leaks under pressure;
repair of dry and wet cracks;
sealing of working and expansion joints;
filling of voids.
The electric single-component injection pump is easier to maintain than other injection pump models, convenient for carrying and transporting (weight 4 kg), suitable for everyday use and has an excellent price / performance ratio!
It is also possible to describe the device as an electric airless pump, which is an electric piston pump for operation that does not require compressed air. Depending on the type of work and material, the pressure can vary from 0 to 400 bar, which can be varied by adjusting the drill's speed.
The electric reciprocating injection pump must only be used for injection under pressure. The pump is not intended for any other purposes. Only materials listed in the technical documentation of the relevant device can be injected. For uninterrupted operation of the injection equipment, this instruction must be carefully studied by the Operator. The operator of the pump identifies the persons performing the installation, start-up and maintenance of the installation.
With the help of an injection pump, it is easy and quick to perform waterproofing and repair work in concrete structures:
stopping active leaks under pressure;
repair of dry and wet cracks;
sealing of working and expansion joints;
filling of voids.
The electric single-component injection pump is easier to maintain than other injection pump models, convenient for carrying and transporting (weight 4 kg), suitable for everyday use and has an excellent price / performance ratio!
It is also possible to describe the device as an electric airless pump, which is an electric piston pump for operation that does not require compressed air. Depending on the type of work and material, the pressure can vary from 0 to 400 bar, which can be varied by adjusting the drill's speed.
The electric reciprocating injection pump must only be used for injection under pressure. The pump is not intended for any other purposes. Only materials listed in the technical documentation of the relevant device can be injected. For uninterrupted operation of the injection equipment, this instruction must be carefully studied by the Operator. The operator of the pump identifies the persons performing the installation, start-up and maintenance of the installation.